The Knightsbridge lever wall mounted basin mixer tap is available in Brushed Bronze, Chrome and Matt Black
Key Features:
- Wall-mounted basin mixer — leaves the basin surround clear
- Matt black finish — a flat, non-reflective black
- Single-lever control — sets flow and temperature together
- 180mm spout projection — reaches over a countertop basin
- Works from 0.2 bar — suits a gravity-fed hot water system
- Brass construction — rust-resistant and durable
- 3 Year Warranty
What’s Included:
- Knightsbridge spout with wall plate
- Knightsbridge lever control with wall plate
Wall-Mounted Design
Everything but the spout and the lever is buried in the wall, so the basin and the surface around it stay clear. Two tap holes are needed, 120mm (4.7in) apart.
The Knightsbridge Lever Wall Mounted Basin Mixer Tap is a two-hole wall-mounted basin mixer. The spout and the lever are separate pieces, each on its own round 55mm (2.2in) wall plate, and the body of the tap is plumbed in behind the wall.
The spout reaches 180mm (7.1in) out from the wall, and the outlet drops 32mm (1.3in) at a 110-degree bend, which clears the rim of a countertop basin. The two plates are fixed 120 mm (4.7in) apart. Basin taps of this type are plumbed in before the wall is tiled or boarded.
Available in Three Finishes
The tap is available in Chrome, Matt Black or Bronze
Single-Lever Control
The taps features one easy to operate lever handle, which controls the flow and temperature together. Lifting it turns the water on, and moving it left or right changes the temperature.
Outlet and Bore
The outlet sits 32mm (1.3in) below the spout centre line on a 110-degree bend. The bore measures 20mm (0.8in) across.
Flow and Pressure
Minimum operating pressure is 0.2 bar. Flow runs from 2.3 litres a minute at 0.1 bar to 16.1 litres a minute at 3 bar.






